Amateur radio receiver ATS-Decoder Mega - HARDUINO

Select your language

Radio amateur

receiver ATS-Decoder Mega


  • a new version of the popular ATS amateur radio receiver with a large 4-inch screen in a durable aluminum case with stereo speakers
  • increased capacity of the built-in lithium battery
  • built-in CW and digital modes decoder

A new version of the popular amateur radio receiver ATS25 max-Decoder with a large 4-inch screen in a durable aluminum case on a more expensive SI4735D60 chip than its predecessor and has high sensitivity


Video review of the ATS-Decoder Mega receiver with firmware H-RADIO 4.2 AIR


Compact size 115x85x30 mm, despite the large screen, which allows the receiver to be used as a mobile device. Durable aluminum body with a silver anodized finish to hide scratches.

4-inch color screen 480 x 320 pixels with touch control.

The convenient and durable power button is designed for the entire service life of the device.

Built-in 4000mAh lithium battery.

Change the brightness or turn off the screen completely for even greater autonomy and less interference.

up


A pair of stereo speakers has a large volume reserve for outdoor listening and creates a high-quality sound picture when listening to stereo programs in the FM broadcast range.

3.5mm headphone jack.

Type-C connector for charging and connecting to a PC.

A capacious built-in battery and the ability to recharge from any power bank with a USB connector allows you to listen to the receiver for as long as possible outdoors, on a picnic or on a walk.

up


SMA connector for connecting an external receiving antenna.

Frequency range:
132kHz - 30000kHz AM, SYNC, SSB, CW, DIGI;
64MHz - 108MHz FM with RDS function.

Adjustable bandwidth from 500Hz to 6000Hz depending on modulation.

Automatic search and storage of broadcast stations.

Frequency setting accuracy for SSB is up to 1Hz.

RDS function for FM band (name of station and current program, type of radio station and local time).

Digital mode decoder: FT8, FT4, PSK, RTTY

up




More information about firmware capabilities H-RADIO

Lists ranges according to standards and regional specifics. Division into broadcast and amateur radio bands.

Quick frequency entry. Two VFOs with fast switching.

Unlimited memory of stations with grouping by reception area. FM mode to quickly switch between stored FM stations for a selected location.

Channel mode for CB band.

Retro scale with grouping of ranges according to reception conditions. Current information about the passage of waves from the Internet.

Range scanner with bar graph display for quick detection of operating stations.

Wide range of customization options.

up


Morse code decoding with speed display.

Decoding digital modes of communication:
- RTTY (45.45 / 50 / 75 baud);
- PSK (BPSK32 / BPSK63);
- FELD-HELL;
- FT4 and FT8.
Saving decoded data to a file and sending it to a PC.
Possibility of expanding the list of digital communication standards.

Convenient signal tuning using the waterfall indicator.

up


Scope of delivery:
- receiver ATS-Decoder Mega;
- telescopic antenna;
- antenna Wi-Fi;
- cable USB;
- stylus;
- user manual.

Packed in a cardboard box with protection for transportation.

up